P0006 - Fuel Shutoff Valve 'A' Control Circuit Low
A fuel shut-off valve is used to block the fuel supply to the pump when the engine is switched off.
The fuel shut-off valve will normally be located on the body of the fuel pump and will operate using an electrical solenoid valve.
The method used to shut the fuel off will vary between different fuel systems and manufacturers.
Fault Code Explained
This fault code indicates that the control signal is either below it’s normal operating parameters or is constantly at zero.
Identify the type of fuel shut-off valve fitted and also the method of control, this may be a switched earth which is either on/off or a frequency/duty cycle signal
- Test for relevant signal at Fuel Shut-Off Valve
- Use scan tool to operate valve if possible
Due to the variety of systems for fuel shut-off, it is recommended to follow the manufacturers fault finding information when this fault code is stored